Description; Description Of The Appliance; Description Of The Control Panel; Preliminary Checks - Barazza 1CFFY1 Mode D'emploi

damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to respect these instructions.
N.B.: The appliance has a cooling fan.
This comes on whenever coffee, steam or hot water is delivered.
After several minutes, the fan goes off automatically.

DESCRIPTION

Description of the appliance

(page 3 - A)
A1. Cup tray
A2. Service door
A3. Coffee guide
A4. Waste coffee container
A5. Brewing unit
A6. Cup tray lights
A7. On/OFF/stand-by button
A8. Control panel
A9. IEC connector
A10. Cappuccino maker (removable)
A11. Cappuccino maker nozzle
A12. Water tank
A13. Coffee spout (adjustable height)
A14. Drip tray
A15. Bean container lid
A16. Bean container
A17. Grinding adjustment knob
A18. Pre-ground coffee funnel door
A19. Measure
A20. Compartment for measure
A21. Pre-ground coffee funnel
A22. Power cable
A23. Main switch
A24. Tray

Description of the control panel

(page 3 - B)
N.B.: On the control panel will illuminate only the icons
B6, B7, B8, B9 and B14 for the commands enabled.
N.B.: A light touch is enough to activate the icon.
B1. Display: guides the user in using the appliance.
B2. icon to activate or deactivate menu parameter setting
mode
B3. icon to turn lights A6 on and off
B4. icon to select the coffee taste
B5. icon to select the type of coffee (espresso, small cup,
medium cup, large cup, mug)
B6. icon to exit the selected mode
B7-B8. icons to scroll forwards or backwards through the
menu and display the various modes
B9. OK icon to confirm the selected function
B10. icon to deliver a cup of coffee
B11. icon to deliver two cups of coffee
B12. icon to deliver steam
B13. icon to deliver hot water

PRELIMINARY CHECKS

Controls after transport

After removing the packaging, make sure the product is comple-
te and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.

Installing the appliance

Important!
• Installation must be performed by a qualified professional
in compliance with legislation in force in the country of in-
stallation (see Built-in installation).
• The packing elements (plastic bags, polystyrene foam, etc.)
should be kept out of reach of children.
• Do not install the appliance in rooms where the temperatu-
re may drop to 0°C or lower.
• Customise the water hardness as soon as possible following
the instructions in the "Setting water hardness" section.

Connecting the appliance

Danger! Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly in-
stalled socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified pro-
fessional.
To comply with safety directives, an omnipolar switch with a mi-
nimum contact distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
5
EN