Settings - Viatom Pulsebit EX PB-20 Guide Rapide

Poor
signal
Unable
to analyze

8.5 Settings

User Mode: Settings->User Mode->touch to choose
One-User/Two-User modes
When you switch to Dual User mode, the homepage will show
User A and User B icons. Choose a user to start taking
measurements, and the results will be marked A or B.
In single user mode, the results are not marked.
ECG Length: Settings->ECG Length, for 30s/60s/5 minutes
Note: only measurements through cables are supported in
5-minute mode
usual and regular pattern.
Irregular heart beat - the recorded ECG shows
an erratic pattern. It may be caused by
overstressing the heart or other conditions.
Low signal amplitude or noise. Changing to
Mode II may help.
ECG recording is incomplete.
14