mirastudios Bridgehampton Mode D'emploi page 5

Thread and tighten
two bolts (both sides)
Step 2:
A. Line up the Crib Sides (D) and (E) with the Headboard (A). The mattress support holes
on the crib sides should be facing the inside of the crib.
B. Align the bolts with the holes in the headboard and tighten with the allen wrench. Repeat
for the other side.
Mattress support holes
should face the inside of
the crib
(D) Left Crib Side
(A) Headboard
(E) Right Crib Side