GE G7CDAASSPSS Manuel D'utilisation page 6

Using the Stainless Carafe Drip Coffee Maker
Before Use
main unit / accessories.
• Clean the main unit / accessories when you have not used for
a long time.
How to Use
water and pour into water reservoir at the back of the unit.
The stepped water level indicator can be easily viewed inside
unit.
IMPORTANT: Before brewing, always check to make sure
water level is past the MIN line and add water if needed. Never
NOTE:
the amount of water placed into the water reservoir; as much as
2. Never place empty carafe on the warming plate.
amount of room-temperature water (20-25°C), and then close
the top lid.
amount of room-temperature water (20-25°C), and then close
the top lid.
After power on, press "BREW/CANCEL" key once, the indicator
illuminates in white, the relay functions, at that time, the
heating element starts to work, which indicates the appliance
into the standby mode.
LCD display shows 12:00 AM (":" does not blink). The appliance
enters into the clock-setting mode. Press "HR" and "MIN" keys
to set the current time. If there is not any operation within 15
seconds, the current time shown in the LCD display will be
Set the clock
A. Shortly press "HR" key once, one hour can be changed.
Hold and press "HR" key, the "hour" can be increased
continuously.
B. Shortly press "MIN" key once, one minute can be changed.
Hold and press "MIN" key, the "minute" can be increased
continuously.
C. After setting the time, press "BREW/CANCEL", "Auto Brew"
not operate the appliance for 15 seconds and then the set
When the appliance is under the standby mode, hold and press
"HR" or "MIN" key for more than 3 seconds to enter into the
clock setting mode.
6
Function selection:
in the standby mode or the Auto-Brew mode.
C. "Clean" function: When the appliance has worked for 80
remind the user that the appliance needs to be cleaned.
seconds in any status, the white indicator turns on, and the
cleaning program is started, the heating elements works until
the water in the water tank is boiled away, then the appliance
will enter into the standby mode. The "Cleaning" shown in
the LCD display can only be canceled after the descaling is
"Auto Brew" function
A. Press "Auto Brew" key, the LCD display shows "Auto Brew
on" and "AM 1:00", then set the auto-brew time by following
Auto Brew" key, the display shows "Auto Brew on", and the
auto-brew time stops blinking, then the appliance enters into
the auto-brew mode, after 5 seconds, the appliance goes
back to the main interface, at that time, the LCD display
shows "Auto Brew on" and current time, which means the
B. Press "Bold" key, the LCD display shows "Auto Brew on",
"Bold" and the current time, which means the "Auto Brew"
C. When the auto-brew time is reached, the white indicator
function is activated.
D. Can press "Auto Brew" key to cancel the auto-brew function
when the appliance works under the auto-brew mode. After
auto-brew function is canceled.
brew cycle.
NOTE: To interrupt the brewing process at any time, press the
BREW button; then remove plug from wall outlet.
49-9000004 Rev. 0