cAre And cleAninG of the oVen
• Be sure all controls are OFF and all surfaces are COOL before cleaning any
WARNING
• If your range is removed for cleaning, servicing, or
Oven vent
Cleaning painted parts and decorative trim
• For general cleaning, use a cloth with hot and soapy water.
• For more difficult residue and built-up grease, apply a liquid detergent directly onto the area and
leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do not use abrasive cleaners on
any of these surfaces. They can scratch.
Cleaning stainless steel surfaces
1. Shake the bottle of Stainless Steel Appliance Cleaner or polish well.
2. Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or damp
paper towel.
3. Clean a small area, rubbing with the grain of the stainless steel if applicable.
4. Dry and buff with a clean, dry paper towel or soft cloth.
5. Repeat as necessary.
• Do not use a steel-wool pad. It will scratch the surface.
• If a mineral oil-based stainless steel appliance cleaner has been used before to clean
the appliance, wash the surface with dishwashing liquid and water prior to using the
Stainless Steel Appliance Cleaner or polish.
47_ Maintaining your appliance
NE595R0ABSR_AC_DG68-00425A-05_EN.indd 47
part of the range.
any reason, be sure the Anti-Tip device is re-engaged
properly when the range is replaced. If you fail to re-
engage the Anti-Tip device, the range could tip and
cause serous injury.
Oven vent
• The oven vent is located above the
right rear surface unit.
• This area could become hot during
oven use.
• It is normal for steam to come out of
the vent.
• The vent is important for proper air
circulation. Never block this vent.
2015-02-27
4:37:12