Battery Recycling; Accessories - Panasonic EY3743 Instructions D'utilisation

IV. MAINTENANCE
• To make any adjustments, changing
accessory, or storing the vacuum cleaner,
remove battery pack from the vacuum
cleaner.
• To clean the vacuum cleaner, wipe with a dry,
soft cloth.
How to empty dust cup (Fig.4)
1. Switch off the vacuum cleaner.
2. Remove the dust cup from the main unit
while pushing the button for attaching or
removing dust cup. (a)
3. Pull out the dust filter from the dust cup by
holding a tab. (b)
4. Empty the dust cup. (c)
5. Attach filters into the dust cup.
6. Fit the tab for fixing dust cup into the groove
of main unit, and attach the dust cup to the
main unit until it clicks. (d)
V. ACCESSORIES
Battery Pack
• See the Specification.
Battery Charger
• For inquiries please contact an authorized
dealer.
NOTE: Battery pack and charger are not
included in this kit.
[Battery Pack]
For Appropriate Use of Battery
Pack
• For optimum battery life, store the Li-ion
battery pack following use without charging it.
• When charging the battery pack, confirm that
the terminals on the battery charger are free
of foreign substances such as dust and water
etc. Clean the terminals before charging the
battery pack if any foreign substances are
found on the terminals.
The life of the battery pack terminals may be
affected by foreign substances such as dust
and water etc. during operation.
• When battery pack is not in use, keep it away
from other metal objects like: paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may
cause sparks, burns or a fire.
• When operating the battery pack, make sure
the work place is well ventilated.
Battery Pack Life
The rechargeable batteries have a limited life. If
the operation time becomes extremely short
after recharging, replace the battery pack with a
new one.

Battery Recycling

NOTE:
For environmental protection and recycling of
materials, be sure that it is disposed of at an
officially assigned location, if there is one in
your country.
Recommendations for use
Pack cover
Label
Be sure to use the Pack cover
• When the battery pack is not being used,
store the battery in a way that foreign
substances such as dust and water etc. do
not contaminate the terminals. Be sure to
attach the battery pack cover to protect the
battery terminals.
• When charging the battery pack, confirm that
the terminals on the battery charger are free
of foreign substances such as dust and water
etc. Clean the terminals before charging the
battery pack if any foreign substances are
found on the terminals.
The life of the battery pack terminals may be
affected by foreign substances such as dust
and water etc. during operation.
CAUTION: To protect the motor or battery,
be sure to note the following
when carrying out operation.
• If the battery becomes hot, the protection
function will be activated and the battery will
stop operating.
For safe use
• The battery pack is designed to be installed
by proceeding two steps for safety. Make sure
the battery pack is installed properly to the
main unit before use.
• Connect the battery pack into the body of the
tool until the red or yellow label disappears.
- 11 -
Terminals