Installing A Sound Bar (Sold Separately) - Samsung Q90R Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Preventing the TV from falling
1. Using the appropriate screws, firmly fasten a set of brackets to the
wall. Confirm that the screws are firmly attached to the wall.
– You may need additional material such as wall anchors
depending on the type of wall.
2. Using the appropriately sized screws, firmly fasten a set of brackets
to the TV.
– For the screw specifications, refer to the standard screw part in
the table under "Mounting the TV on a wall".
3. Connect the brackets fixed to the TV and the brackets fixed to the
wall with a durable, heavy-duty string, and then tie the string tightly.
– Install the TV near the wall so that it does not fall backwards.
– Connect the string so that the brackets fixed to the wall are at
the same height as or lower than the brackets fixed to the TV.

Installing a sound bar (sold separately)

When you install a sound bar (76 mm or less in height) on the TV stand, attach the RUBBER-FOOTs to the
bottom of the sound bar before mounting the sound bar. Make sure that the RUBBER-FOOTs are not out of the
stand width. Refer to the figure below:
TOP
English - 12
• The product colour and shape
may vary depending on the
model.
BOTTOM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gq55q90rQe55q90rGq65q90rQe65q90rGq75q90rQe75q90r

Table des Matières