SNOWJOE RJ204M Mode D'emploi page 3

EN
Assembling the Roof Rake +
Adjusting the Handle
1. Remove the shipping cap from the top of the pole. Retain
for storage (Fig. 1).
Cap
Fig. 1
2. Unscrew the handle knob and extend the pole to expose
the small holes (Fig. 2).
Hole
Fig. 2
3. Depress the small buttons at the end of the handle so
that you can insert the handle into the roof rake head
(Fig. 3).
Buttons
Fig. 3
4. Using the hex key wrench, screw the metal braces to the
roof rake head with the two short hex screws (Fig. 4).
Short hex
screw
Metal
braces
Fig. 4
5. Affix the metal braces to the pole by threading the long
hex screw through the metal braces and the pole. Secure
the screw with the locking nut using the open end wrench
(Fig. 5).
locking
nut
Long hex
screw
Fig. 5
3
Short hex
screw
Hex key
wrench
Open
end wrench