Chef's Grill IR2818-1 Mode D'emploi page 21

For each door, insert bottom hinge pin into hole on bottom panel. Push down on top hinge pin to insert into
11
hole in bottom corner of control panel. Adjust magnets on the bottom panel and front beam to align the
magnets with doors, and then tighten magnet screws.
Left door
Side Shelf
12
Loosen the two screws attached to the left panel of the burner box 3 to 4 turns as shown. Hang the side shelf
by the slotted holes in its side onto the loosened screws. Fasten the side shelf with two 1/4-20 x 5/8"
screws as shown. Tighten the previously loosened screws.
Side Shelf
Loosen
1/4-20 x 5/8"Screw
21
Right door
1/4-20 x 5/8"Screw
Qty. 2