Wifi Configuration; Device Registration; Quick Install Guide - Intesis AC Cloud Control Guide D'installation

Installation process should only be performed by an authorized installer.
Please follow all Safety Instructions provided by the AC manufacturer manuals.
1. Product description (Figure 1)
The device is an external module capable of connecting Air Conditioning units into your WiFi network to provide
global connectivity and remote control applications through a friendly user interface.
Packaging content (Figure 1):
Device Quick start guide
2. Device location
Device installed inside the AC unit or hidden (Figure 2-a)
• The indication LED and the button are not going to be accessible by the user.
• If there is not enough space for installation inside the AC unit, the following actions can be performed:
o If it is due to water pipes, change the side of the AC where they are connected to get more space inside
the AC unit.
o Otherwise the support surface can be removed.
Device installed outside the AC unit (Figure 2-b)
• The device can be fixed both: using screws of double side tape.
• The cable lid has several options to direct the cables to the desired direction.
3. Device connection
1. Unplug the Air Conditioner (AC) unit from mains.
2. Access to the main Printed Circuit Board.
3. Locate the socket connector indicated in the Installation Sketch.
4. Select a location for the device.
5. Connect the A-end (the long one) of the supplied cable to the Air Conditioner specific connector and the B-end
(the short one) to the device connector. *
6. Close the Air Conditioner unit.
7. Plug the AC to the power supply line. If connection with the Air Conditioner has been successful, device LED
will start blinking Green and then will change to steady Green.
* Check the Installation Sketch for detailed information.

4. WiFi configuration

Follow Instructions from our wifi configuration manual at:
https://www.intesis.com/docs/AC_Quick_Wireless_Config

5. Device registration

Follow bellow instructions to register your device:
1. Visit https://accloud.intesis.com
2. Create an account (in case you don't have it yet).
3. Visit the settings/device/ section and click on add device.
4. Introduce the registration code (25-digit code on the label).
Installation sketch
(Figure 3)
or download the App from Google Play or the App Store and follow instructions

QUICK INSTALL GUIDE

Specific cable Label
EN
3