Kobalt 6904 Mode D'emploi page 6

Clé à chocs pneumatique de 8 ampères
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY INFORMATION
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothing, jewelry or long hair can be caught in
moving parts.
• If devices are provided for the connection of dust-extraction and collection, ensure
that these are connected and properly used. Use of these devices can reduce dust-
related hazards.
Power Tool Use and Care
• Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc., in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in
a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Specific Safety Rules For Impact Wrench
Hold the tool by the insulated gripping surfaces when performing an operation where
the tool may contact hidden wiring or its own cord. Contact with a "live" wire will make
exposed metal parts of tool "live" and shock the operator.
Check the socket carefully for wear, cracks or damage before installing it on the impact
wrench.
Hold the tool firmly with both hands.
Always be sure that you have a firm footing. Be sure that no one is below you when using
the tool in elevated locations.
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

0028180

Table des Matières