LBX instruments H03D Mode D'emploi page 9

have been damaged during transportation, please contact manufacturer/supplier for technical support.
6. Function: Heating (H03D series)
The device is controlled by digital temperature control technology, which has two separate safe circuits. The hotplate is
kept at a constant temperature by a digital control circuit. The hotplate temperature can also be monitored from a
separate, adjustable safe circuit. The two internal temperature sensors for temperature control are built into the hotplate.
The single external PT1000 can monitor the temperature of the sample.
•
If using an external sensor PT1000: Always connect it to the device BEFORE turning the power on and insert it into the
sample BEFORE heating (see section 6.1).
•
Set the temperature by rotating the temperature control knob slowly towards the target value.
•
While the heating function is on, the LED screen displays the temperature value on the left-hand side.
•
The heating function is switched on or off by pushing the heating knob.
The heating function will be stopped automatically under abnormal conditions. The safe circuit keeps the hotplate
temperature under 320°C.
Warning!
Forbidden to transfer the vessel while the
instrument is working.
9