Troubleshooting; Technical Data - Vieta Home VH-HT010 Manuel D'utilisation

TROUBLESHOOTING

PROBLEM
No power when the unit is turned on.
No sound.
The display does not show RDS
information.
32
CAUSE/REMEDY
- In standby mode, you need to press TUNER
button in remote control to re-activate the tuner.
- Check that the plug has been correctly inserted
into the socket.
- The internal fuse has blown and must be replaced
by a qualified service technician.
- The power cord has been damaged and must be
replaced.
- The unit has not been turned on.
- Incorrect connection to the amplifier.
- No loudspeakers have been connected to
the amplifier.
- The tuner has not found any stations.
- The tuner has not found any stations.
- The selected station does not broadcast
any information.
- The antenna signal is too poor. See the section
on adjusting the antenna.
Tuner FM/AM

TECHNICAL DATA

TECHNICAL DATA
RF section:
Tuner bands
Sensitivity
Display:
Presets
Audio outputs
Voltage
Power consumption
Dimensions (H x W x D):
Weight
Accesorios incluidos
1. 1pcs User manual;
2. 1pcs Power cord;
3. 1pcs Remote control;
4. 1pcs 2-RCA cable.
We reserve the right to change the technical data and the design of the product without notice as a result of
further development.
FM 87.5-108.0 MHz
AM 520-1710 KHz
FM 12 dBu @SN=20 dB
AM 55 dBu @SN=30 dB
1 line of 9 characters
VFD
40
Stereo 2.5 Vpp
220-240 V
20 W
50 x 430 x 290 mm
2.60 kg
ENGLISH
33