Refrigerator Features and Uses
General Features
Temperature Control Dial
The temperature control dial has settings from
• "1" to 7 plus "OFF".
• "1" is the warmest
• "7" is the coldest
Initially, set the temperature control dial to "4". After using the refrigerator for 24
hours, adjust the temperature control dial to the setting that best suits your needs.
Turning the temperature control dial 'OFF' stops the cooling cycle; however, it
will not shut off power to the refrigerator.
NOTE: If the refrigerator has been placed in a horizontal or tilted position for
any period of time, wait 24 hours before plugging the unit in.
ImPORTANT: If you unplug or turn off the refrigerator, allow 4 minutes before
restarting it or re-plugging it in.
FREEZER COmPARTmENT & USE OF THE ICE CUBE TRAYS
This compartment is designed for making ice cubes and for short-term food
storage (a few days at most). This compartment is not cold enough to freeze
foods safely for extended periods of time.
• I f ice cube tray freezes to the floor, pour a little warm water around it to loosen
it. Do not use boiling water, which can damage plastic parts, or sharp metal
objects such as a knife or screwdriver, which can damage the cooling system
tubing. Wash tray in lukewarm water only. Do not wash in the dishwasher.
Interior Shelves
To remove or replace a full-width slide-out shelf: (see fig. #4)
1. Gently tilt the shelf up and slide
forward until the shelf has been completely removed.
2. To replace the shelf, gently slide the shelf back.
fig. 4
English
8