Algam Lighting VULKAN Mode D'emploi page 11

INSTALLATION
1
2
3
4
1- Receiver HF remote connector
2- Wireless DMX built-in receiver
3- Antenna
4- Security hook for safety cable
OPERATION INSTRUCTIONS
Connect the fog machine only in an earthed mains outlet or extension cord.
ATTENTION: the power cord can only be replaced by an original replacement one.
Unplug the mains lead before filling the fluid tank.
How to use
Unpack the fog machine
Do not connect yet the power cable.
Fill the fluid tank .
Connect the unit to mains outlet. Turn ON the mains switch. The heating element is automatically switch ON.
It will take about 4 minutes until the working temperature is reached.
Display will show « warming up».
Once the LCD displays «Ready», you are ready to go.
You can now use the unit in DMX mode, in manual mode, with wireless remote controller or with wireless
DMX signal transmission.
REMOTE
Transmitter
WIRELESS REMOTE
RECEIVER
WIRELESS DMX WIRELESS DMX
RECEIVER RECEIVER
WIRELESS
DMX
DMX OUT DMX IN
Receiver t
MANUAL POWER
CONTROL
AC POWER IN
DMX OUT DMX IN
FUSE
T15A - 250V
5- Mains power supply switch
6- Manual fog spray control
7- Power input & fuse holder
8- DMX IN&OUT connectors
Press A,B,C or D for instant fog spray
0
5
6
7
8