Playing Cds/Mp3; Playing Back Music Via Bluetooth - AEG SR 4360 BT Mode D'emploi

English
48
• Automatic station scan:
Important! Any previously stored radio stations will
be overwritten.
Press the button (11). The device is searching the
complete FM frequency band for radio stations. The
stations found are stored ascending by frequency.
• Searching for radio stations manually:
Turn the TUNING control (6) until you have found the
radio station that you are looking for.
Storing stations:
1. Search for the desired radio station with the TUN-
ING control (6).
2. In order to store the radio station, press the PROG./
P-MODE button (22). The notification "P 01" will
blink in the display and "MEM" is shown.
⊝
3. Use the FOLDER / MEM/10
select the desired memory location.
4. Press the PROG./P-MODE button. The radio sta-
tion will be stored.
NOTE:
"STEREO" will appear in the display once the station is
received with stereo sound.
Selecting stored radio stations
The stored radio stations can be selected by repeatedly
⊝
pressing the FOLDER / MEM/10

Playing CDs/MP3

1. Select the CD mode with the FUNC button (23). The fol-
lowing will appear in the display "CD".
2. Open the CD tray (4) by pressing the PUSH TO OPEN
button (5).
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
4. The total number of tracks and the playing duration will
be shown in the display after a few seconds.
NOTE:
The number of folders and the total number of tracks
will be shown with CDs in the MP3 format.
5. The CD will play from the first title. The elapsed playing
time and the current track will be shown in the display.
If available, the ID3 tag Meta data will additionally alter-
nately be shown as a continuous band with CDs in the
MP3 format. When the ID3 function is shut off, the current
track and the folder will be shown alternately.
6. In order to remove a CD, please press the button (9),
open the CD compartment and lift the CD out carefully.
Always keep the CD deck closed.

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
⊕
buttons (21) to
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
⊕
buttons.
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
2. Select the BLUETOOTH mode using the FUNC button
3. Choose the Bluetooth menu in your player and register
NOTE:
• If a disc is inserted the wrong way around, respectively
if no disc is inserted, then the message "READING" will
blink and "NO DISC" appears on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
(23). The control light PAIR will blink blue. This signalizes
that the device is in pairing mode.
the device in your player. For this, refer to the operation
manual of your player. The device "AEG SR 4360 BT" will
show in your player as a selection.
NOTE:
• Only one playback device can be connected with
the device at one time. If the device is already con-
nected with another playback device, the device
will not appear in the BT selection menu.