OVE MELBA 60 Mode D'emploi page 11

1. Place the wall tracks (E) on their positions and mark the holes.
2. Remove the wall tracks and drill guide holes with a ø8mm (5/16in) drill bit.
3-4. Insert the wall anchors (AA) into the wall. Replace and secure the tracks (E) with screws (BB). Do not
overtighten.
1
E
3
AA
WALL TRACK INSTALLATION
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
11
2
ø8 mm
5/16 in
4
E
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
BB