Temporary Override Of Schedule - Honeywell RTH2300 Manuel D'utilisation

Operating Manual

Temporary override of schedule

To temporarily ignore the schedule, press the Up or
Down button until the desired temperature is displayed.
The word Temporary will appear on the screen and the
period display will flash to indicate that the current period
has been overridden. The new temperature will be used
until the next period begins.
NOTE: Pressing the Up or Down button once will display the setpoint temperature. To
change the setpoint temperature, press either button more than once.
Press the Run button if you wish to cancel the temporary setting before the beginning of
the next period.
69-2326EF—01 12