Alto Professional UBER Guide D'utilisation page 6

Operation
Pairing a Bluetooth
1. Turn on your Bluetooth device.
2. Turn on Uber using the power switch. If you have previously connected to another
Bluetooth device, Uber will reconnect.
3. Navigate to your Bluetooth device's setup screen, find Uber and connect.
Note: If your device requires a passcode or PIN, enter 0000.
4. The Bluetooth LED will light up solid when it is "paired."
If your Bluetooth device is not able to connect to Uber, press the Bluetooth button on
Uber to break previous Bluetooth connections and reset the Bluetooth module.
5. Start playback from your Bluetooth device.
6. To disconnect a connected Bluetooth device and connect to another Bluetooth device,
press the Bluetooth button. Repeat Step 3.
Note: If you experience trouble connecting or playing music, update your device's OS.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Uber:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one-time step).
3. Power on Uber.
4. Touch and briefly hold your device to the NFC logo located on Uber's top panel.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
6. To unpair, gently bump your device against the NFC logo.
Using the Aux Input
Connect your smartphone, MP3 player, or similar device to the Aux Input. Adjust the output
volume on your source device and then adjust the overall volume using the Aux Input Volume
Control on Uber.
6
®
Device