Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The volume can be directly controlled using the 4 and 5 keys
without going through the menu.
When the LED is on, the display is in standby mode. A simple press on the 1 button on the remote
control turns the display on.
If you have correctly connected the green wire during installation, the system display in standby mode
will operate directly on the camera input corresponding to the reverse gear change.
With an optional camera, you can always have a distant view of the rear of the vehicle, and when you
shift into reverse, you can automatically switch to the camera dedicated to monitoring your
manoeuvres.
Quick troubleshooting:
No image:
- Press the POWER button on the monitor or remote control to turn the screen on.
- Then check your screen power supply. Is the ignition on?
- Then check your monitor power supply and fuse.
The image on the screen remains blue and displays "no signal":
- Check the connections to the camera, if the cable is not cut!
- Change the source on the screen or reverse the CAM1 and CAM2.
Remote control problem:
-
Change the battery in the remote control.
-
Point the remote control at the infrared receiver on the display.
Technical specifications :
Screen:
Diagonal image:
Resolution :
Standard:
Format :
Video input:
Loudspeaker:
Menu:
Power supply/ voltage:
Contents of the box:
1 monitor - 1 remote control
2 YEAR WARRANTY
7'' (13cm)
800 x 480 pixels
PAL / automatic NTSC
16:9
2 x 4 Speaker PINS
Integrated 0.5W
OSD
12/24V DC
Publicité
Table des Matières
