ALPHA-TOOLS ASB 24 Mode D'emploi page 10

Anleitung ASB 24 AlphaTools
GB
Tool illustration:
5. Please note the data quoted on
Figure 1: Torque adjustment
facility; selector drill /
hammer mode
Figure 2: 1st gear / 2nd gear
selector switch
Figure 3: Battery capacity
6. In periods of heavy duty the
reading
Figure 4: Forward / Reverse
selector switch
Figure 5: On/Off switch
Figure 6: Removable battery
pack
Important notes:
Safety regulations:
It is imperative to read these notes
1. Protect your battery-powered
before putting your battery-powe-
red drill/screwdriver into operation:
1. The removable Ni-Cd battery
2. Keep the charger and battery-
pack supplied with your bat-
tery-powered drill/screwdriver
has to be charged before you
3. Use only sharp drill bits and
use the tool for the first time.
2. Use the supplied battery char-
ger to charge the battery pack.
4. Wear suitable working clothes
It takes a maximum of 1 hour
to charge an empty battery. Do
5. Never use the battery-powered
not use the supplied battery
charger to charge any other
tools or appliances.
3. The battery pack reaches its
6. Look for concealed electric
maximum capacity after
approx. five discharge/charge
cycles.
4. Ni-Cd batteries will also
7. Never throw old batteries into
discharge when they are not in
use. It is recommended, there-
8. Avoid contact with leaky batte-
fore, to charge the batteries
10
18.02.2003 12:46 Uhr
regularly.
the rating plate of the battery
charger. Operate the charger
only from the same mains vol-
tage as that quoted on the
rating plate.
battery pack will grow warm.
Allow the battery pack to cool
to room temperature before
starting to charge it.
drill/screwdriverand charger
from the damp and rain.
powered drill/screwdriver safe
from children.
undamaged, properly fitting
screwdriver bits.
and safety goggles.
drill/screwdriver and charger in
the vicinity of vapours and
combustible liquids.
cables, gas pipes and water
pipes before drilling and scr-
ewdriving in walls.
an open fire. Risk of explosion!
Seite 10