YBA Genesis CD4 Mode D'emploi page 6

Genesis CD4 CD Player
Discovering your CD4: Rear view
RIGHT
RCA BALANCED
1 2
RCA AUDIO OUTPUT: Connect your amplifier (or any other suitable device such as powered speakers,
1
receiver, etc) to the RCA outputs of your CD4.
Balanced Audio output: This is a higher quality output which can reject noise and interference in the
2
cable when used with equipment with balanced inputs. XLR connectors should be wired as follows:
Pin 1 - Ground; Pin 2 - Hot (in-phase); Pin 3 - Cold (phase-inverted).
Coaxial digital output: The coaxial digital output allows you to connect an external DAC or a digital
3
recorder.
Coaxial digital output switch: Turn ON or turn OFF as required.
4
Power inlet: Use the mains cable provided with your CD4. Be sure the switch is in OFF position before
5
plugging or unplugging the mains cable.
Page 6
LEFT
COAXIAL
RCA BALANCED
ON
OFF
1 2 3 4
www.ybahifi.com
4
G e n e s i s C D
C D P L A Y E R
N
V Hz 50 W
D e si gn ed in F ra nc e
5