Setting Up The Mobile App; Mounting Device - FenSens FENEU1 Mode D'emploi

SETTING UP THE MOBILE APP

1.
Download the app on the Google Play or Apple iTunes App Store
2.
Select whether the device will be mounted on the front or back of yor
vehicle. Select only one option for now, but you can choose a second
device to the front or back after the initial setup process.
3.
Adjust the clearance for your device, especially if it is placed on
yourback license plate. This is to compensate for the bumper or hitch
possibly sticking out past the position of the sensors.
4.
Make sure your smartphone Bluetooth settings are turned on, then
pair your smartphone with the FenSens device and the QuickLaunch
button. Make sure you accept all permissions required by the app.
On iOS the TAP QuickLaunch feature works best if you have the app
running in the background and your location settings turned to "Always
On" for FenSens. Lastly, please allow push notifications from our app.
5.
Launch FenSens anytime you want to use it by simply opening the app,
hitting the sensor icon within the app's navigation bar, or tapping the
included QuickLaunch button.

MOUNTING DEVICE

1.
Place included batteries within the smart parking sensor device's
bottom panel, then seal it up with the provided set of safety screws.
It is best to set up the mobile app and pair it with the device before
installing on the vehicle.
2.
After setting up the app, place the FenSens frame onto the front or
back of your car by aligning the holes on the bumper with the holes
on the frame and securing with the included set of screws. We have
included white washers if you need something to screw into, for
9