AEG BSS 4820 Mode D'emploi page 32

English
32
Playing back music files
There are three ways of playing your own music files with the
unit: via cable connection, wireless via Bluetooth, or via USB
port.
By cable (Cable not included)
1. Connect the 3.5 mm stereo RCA cable to an external
audio source. If required, use a suitable adapter (not
included).
2. Insert the other end of the cable into the AUX-IN jack (10)
on the unit.
3. Press the SOURCE button (7) until the indicator lamp (2)
lights red.
4. Start the playback of your audio source. Listen to the
sound playback via the speaker. You can adjust the
volume using the VOL /VOL buttons (4).
5. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a com-
fortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. After switching on, beeps can be heard, and the
indicator lamp (2) flashes alternately red and blue.
This indicates that the unit is in pairing mode.
3. Chose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device "AEG
BSS 4820" will show in your player as a selection.
NOTE:
• Only one playback unit can be connected to
the speaker. If the speaker is already connected
to another playback unit, the speaker will not
appear in the BT selection menu.
• In case of problems with connection of the
devices: Press the PAIR/
about 3 seconds to switch the unit again to
pairing mode. Now try again to connect the
devices.
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
When the pairing was successful, a beep can be heard and
the indicator lamp (2) lights blue.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In the case of problems with the pairing of a playback
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. Press the
PAIR/ / button (6) to accept the call. The sound is
transmitted via the unit. Speak into the microphone (8)
of the unit or transfer the call to your mobile telephone.
For this, note the display contents of your mobile
phone. Playback continues after you have ended your
call.
/ button (6) for