Domo DO487WK Mode D'emploi page 32

DO487WK-490WK
its power source when not in use, during
service and when replacing parts. Allow to
cool before putting on or taking off parts, and
before cleaning the appliance.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
• CAUTION: In order to avoid a hazard this
appliance must not be supplied through an
external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility.
• The surfaces of the appliance are likely to
get hot during use. It is advised not to touch
the surfaces of the appliance other than the
handles to avoid burns.
• Never leave the appliance unattended while it is functioning.
• Do not use or store this appliance outdoors.
• Do not use this appliance for other than intended use.
• Check carefully that the voltage and frequency of the power net match the
indications on the rating label of the appliance.
• The plug must be plugged into an appropriate outlet that is installed and grounded
in accordance with all local standards and requirements.
• Do not operate this appliance with a damaged cord or plug or in the event the
appliance malfunctions or has been damaged in any manner. Return the appliance
to the DOMO Service Department or its service agent for examination, repair, or
32