- Check that the parental and baby units are set to the same CTSS
code.
Reception of calls/interference from neighbours
- Signal interference due to another baby monitor or cordless telephone
on the same CTCSS code. Set the parental and baby units to another
CTCSS code.
Interference (hissing, buzzing)
- The units are too close (less than 1 meter apart). Increase the dis-
tance between the parental and baby unit.
- Volume on parental unit too high. Reduce the volume.
- The batteries are discharged. Charge the batteries or replace them.
Rapidly flashing green power display, no send/receive
- The batteries are discharged. Charge the batteries or replace them.
Appendix
Care
Your baby monitor is a sophisticated product in terms of design and con-
struction, and should therefore be handled with care.
To clean the baby monitor, wipe first with an antistatic cloth or a damp,
soft leather cloth and then dry using a dry cloth.
Babycom 268
57