EZA COMB-E Guide D'utilisation page 24

AC Charging
WARNING
Check cord for damage prior to use. Never use a damaged or frayed AC cord; If AC cord is
damaged, replace with a new cord before proceeding with AC usage. Improper charging
may result in serious injury and or death.
1. Charging your unit :
• Plug the provided AC cord into the back of the unit (see photo); then plug the cable into an AC
wall outlet.
• While unit is charging, a flashing lightning bolt will appear in the top left-hand corner of the
LCD screen on the front of the unit.
. When the external battery less than 10%, it automatically switches internal External battery is
low
• Once the unit is fully charged, the lightning bolt will stop flashing and disappear completely. All
6 bars of the battery indicator will be full.
• Wait 10–15 minutes for the cells to settle. If you notice the battery indicator drop down to 5 bars,
reset the unit by pressing the key to the turn off position and then restart the unit. This will turn the
charger back on so it can fill up the balanced cells.
• When your unit is fully charged, turn off the unit. Then remove plug from wall and back of
generator..
2. Never let your unit charge via AC for more than 24 hours at a time. Charging more than 24
hours may damage the unit.
3. Never store your unit in a charging state.
4. If the unit is plugged into an AC outlet at the same time it is being used to power an 10 11
device, the unit will continue to function as normal and charge during use. However, you must
still stop charging the system after five hours.
5. Tip: For a shorter charge time, charge via AC and DC simultaneously.
6. DO NOT leave your generator unattended while charging through the AC port.