Basic Features; Login; Live Mode; Video Recording - Eneo PNR-5316 Guide D'installation Rapide

Login

Configuring the NVR's settings and accessing its searching
and other functions require an authorized user login.
1
While in Live mode, right-click on the mouse and
select Login and either press the SETUP button on
the remote control.
2
Select a user, enter the password, and then select OK.

Basic Features

Live Mode

Once Camera Registration is complete, the system will enter
Live Mode.
Press the MENU button on the NVR's front panel while in
Live mode to bring up the Live menu on the right edge
of the screen. Press MENU button once more to hide the
menu. Use the Arrow buttons on the remote control to
select the menu options.

Video Recording

Records the live video.
Refer to the Operation Manual for more information.
Panic Recording
Select Live or Search menu's Panic Recording
press the Panic button on the front panel or the remote
control to commence panic recording on all registered
cameras.
To stop Panic Recording, select the Panic Recording
or press the Panic button again. If the Panic Recording
Duration option under Record Setup > General has been
configured, Panic Recording will automatically terminate
after the specified duration of time has elapsed.
• Panic Recording takes place irrespective of any
recording schedule set up by the user.
• Panic Recording video profile from Record Setup –
General applies to all Panic Recording videos.
22
• There is no default password for the admin
• Leaving the admin account unassigned with
• Click on the
3
To log out, right-click on the mouse and select
Logout.
Panic Recording will not take place if recording mode
is not set to Recycle and the HDD has reached 100%
of its capacity.

Audio Recording

If the Record Audio option under Record Setup > General
has been enabled, the camera will record audio along with
video.
Check your local laws and regulations on making
audio recordings.

Video Recording Playback

You can play back video recordings by using a mouse or
remote control.
icon or
All Channel Playback
1
Press the Menu button while in Live mode.
icon
2
Select the Search Mode
Lapse Search or Event Log Search.
3
The selected search mode will be initiated.
account. Select admin and then OK without
entering a password to log in.
a password poses a security risk. Please assign
a password at your earliest convenience. A
warning message will continue to be displayed
until a password is assigned.
button next to the password
field using the mouse. This will bring up a
virtual keyboard you can use to assign a
password.
icon and then select Time-