Belkin TuneCast 3 Mode D'emploi page 5

Operating Instructions
Using the TuneCast 3 Mobile FM Transmitter
1. Turn down your car stereo's volume.
2. Tune your stereo frequency to a channel with a weak broadcast signal. The ideal channel
is one that is not broadcasting a radio program, or is doing so weakly.
3. Connect the TuneCast 3 to your portable audio device.
4. Connect the included Auto Power Cord to your cigarette-lighter outlet in your car and to
the bottom of your TuneCast 3 for optional powering in the car.
5. Press and hold the ON/OFF button for approximately two seconds. The display's status
bar will indicate when the device is powered on.
6. Press the " " or "
chosen in step 2. Pressing and holding either button will provide faster tuning.
7. Adjust the volume on the audio device to about three-fourths of the maximum.
Adjust the volume of your FM radio to the desired listening level.
Stereo/Mono
Memory Preset
Frequency
" button on the TuneCast 3 to match the frequency on the radio
Power Source
Battery or DC Power
Operating Instructions | 02
EN