Preparing Kitchen Units - Gaggenau AR 403 722 Notice De Montage

en-us

Preparing Kitchen Units

Preparing Kitchen Units
P r e p a r i n g K i t c h e n U n i t s
T he stability of the fitted unit must also be guaranteed
after the cut-out work.
Make the cut-out in the bottom plate in accordance with
the installation drawing.
After the cut-out work is complete, remove the shavings.
Notes
The position of the cut-out can be varied according to
▯
the local conditions.
The distance between the feet must be at least 20½"
▯
(520 mm).
10
Note: For a toe-kick height of less than 5" (130 mm), an
opening towards the front must be created. This part of
the bottom plate can be reinserted after installation.