Installing The Water Filter - Wolf Gourmet ICBWGCM100S-CE Manuel D'entretien Et D'utilisation

GETTING STARTED

Installing the Water Filter

Remove the filter pod from its packaging.
1.
Soak the pod in a cup of fresh water for 15 minutes.
2.
Install the filter pod in the water filter housing and close the
3.
housing until it snaps.
Place the water filter housing into the water reservoir.
4.
After about 30 cycles, the display will show the Water Filter
5.
icon as a reminder that it is time to replace the water filter.
To reset the water filter reminder, turn the Mode Selector
6.
to Clean mode. Then, press and hold the Zero button for
5 seconds.
15 mins
11