Napoleon Element NEFB36H-BS Manuel D'installation Et D'opération page 12

installation and fi nishing
EN
5. Complete hard-wiring (see "electrical information" section).
6. Carefully lift the appliance into the rough-in framing.
7. Secure the appliance to the rough-in framing by installing 4 screws (supplied) through the mounting tabs from
the inside of the appliance (Fig. 3-6).
A x 4
8. Remove the 4 screws holding the back retainers in place (Fig. 3-7). Set the screws and retainers aside (Fig.
3-8).
9. Place the brick panels into the bottom retainers and behind the side retainers (Fig. 3-9).
Repeat on
opposite
side.
Repeat on
opposite
side.
12
W415-1980 / 06.20.19
Fig. 3-7
Side
retainer
Framing
hidden for
clarity.
Bend tabs as
necessary.
Fig. 3-6
Fig. 3-8
Bottom
retainer
Fig. 3-9