Technical Data - Plaston Boneco A7254 Mode D'emploi

Foreword
Congratulations on your choice of the Thermo-Hy-
grometer BONECO A7254!
General information
Physicians recommend a relative humidity level of
40% – 60%. Our sense of well-being then tells us
that the humidity of the air in the room is ideal. And
this level is also ideal for our health, for the animals
and plants in the room, for furniture, instruments
and much more.
Safety instructions
• Read the operating instructions carefully before
using the Thermo-Hygrometer and keep them for
later reference.
• Only operate the Thermo-Hygrometer when it is
completely assembled.
Setting up
Place the Thermo-Hygrometer on a dry, level sur-
face. The Thermo-Hygrometer should be positioned
away from sources of heat or air conditioners using
the table stand or the hanging slot with a nail or
screw.
Commissioning
• Open the battery compartment on the rear side of
the product and insert the battery, taking care to
observe correct polarity. Close the battery com-
partment.
• When you insert the battery, the humidity symbol
will be displayed after 5 seconds.
Description of the appliance
1 Display: Showing indoor temperature and
relative humidity
2 °C/°F button: Select Celsius or Fahrenheit for
temperature
 MAX/MIN button: Press to show maximum
temperature as well as humidity. Press again
for minimum temperature and humidity.
 Hanging slot
5 Reset
6 Table stand
Maximum/Minimum Temperature/
Humidity
• Briefly press the «MAX/MIN» button to display the
maximum/minimum temperature and humidity.
After 15 seconds, the display switches back to the
normal temperature and humidity display mode.
• Pressing and holding down the «MAX/MIN» button
for 2 seconds allows you to delete the saved
maximum and minimum temperature and rela-
tive humidity.
°C/°F temperature display
The temperature is displayed either in °C/°F. Briefly
pressing the «°C/°F» button allows you to switch
between the individual modes.
Disposal
Return your worn out Thermo-Hygrome-
ter to your dealer for proper disposal. You
can obtain information on other ways to
dispose of the Thermo-Hygrometer from
your local council.
Warranty
The warranty conditions are defined by our rep-
resentative in the country of sale. Please contact
your dealer if, despite strict quality control, your
Thermo-Hygrometer becomes defective. You must
present the receipt when making a claim under the
warranty.
Legal notice
The appliance is CE-certified.
Subject to technical modification.
The instructions for use are protected by copyright.

Technical data

Dimensions (L x W x H) 66 x 16 x 106 mm
Weight
Battery 1.5V x 1PC "AAA"
High resolution
Temperature range
Humidity Range
en
60 g
0.1°C
0 °C – 50 °C
20% – 90%
7