Switch Off; Pairing - Beats by Dr Dre wireless Mode D'emploi

UK English

Switch Off

To switch off, press and hold the multifunction key for about three seconds.
The headset beeps descending tones, and the red indicator light is brie y
displayed. If the headset is not connected to a device within 10 minutes, it
switches off automatically.

Pairing

1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired with a device, switch
on the headset. The headset enters the pairing mode, and the blue and
red indicator light starts to ash quickly. To pair the headset if it has been
previously paired with another device, ensure that the headset is switched
off, and press and hold the multifunction key (for about ve seconds) until
the blue and red indicator light starts to ash quickly.
3. Activate the Bluetooth
search for Bluetooth
4. Select "Beats Wireless
player.
5. If necessary, enter passcode 0000 to pair and connect the headset to your
device.
feature on your phone or music player, and set it to
®
devices.
®
" from the list of found devices on your phone or music
TM
11