Set Alarm - koban KTIR-1050 Manuel D'utilisation

Pressing the MODE button also allows you to
access the Type kTemp. Measurement.
The diagram shows the sequence of functions in the
MODE cycle
Switching C/F , LOCK ON/OFF and

SET ALARM.

①
②
③
Select the temperature units (
switch
To lock the unit on for continuous measurement, slide the
middle switch LOCK ON/OFF right. If the trigger is pulled
while the unit is locked on, the laser and backlight will be
turned on if they have been activated. When the unit is
locked on, the backlight and laser will remain on unless it is
turned off using the Laser/Backlight button on the keypad.
To activate the alarms, please slide the bottom switch SET
ALARM right.
www.grupotemper.com
Non-Contact Infrared Thermometers
.
C/F
LOCK ON/OFF
SET ALARM
KTIR-1050
o o
C or F) by using the
o o
C/ F
11