Pioneer XW-NAC3-K Mode D'emploi page 24

05 Playback with HOME MEDIA GALLERY inputs
• There are cases where the time elapsed
may not be correctly displayed.
1 Press HOME MEDIA GALLERY.
It may take several seconds for this unit to
access the network. The following screen
appears when the Home Media Gallery is
selected as the input function.
Selected
Input function
>
U S B
I n t e r n e t
S e r v e r 1
Use / to select the category, and then
2
press  or ENTER.
Select a category from the following list
• USB* - the USB storage device
• Server Name* - Server components on
the network
• Internet Radio**- Internet radio
• Favorites**- Favorite songs currently
being registered
Note
1 When RETURN is pressed from this menu, the last internet radio station listed to will be selected.
24
En
R a d i
1 / 6
Current page/Total pages
• Setup**- Allows the user to perform
various network settings and confirm
information.
• Recently played**- Internet Radio
listening history (most recent 20 incidents)
*: Is only displayed when connected.
**: Is displayed at all times.
Use / to select the folder, music files
3
or Internet radio station, and then press ,
ENTER or /
Press / to scroll up and down the list and
select the desired item.
Only audio files with
you press ENTER, playback starts with the
playback screen being displayed for the
selected item.
To return to the list screen, press RETURN.
In case of the folders with
or ENTER to select the desired folder and audio
files.
For detailed operating instructions, refer to the
section shown below.
• Playback screen - See page 25.
• Favorites folder - See page 25.
You can perform the following operations with
the remote control of this unit. Note that some
buttons are not available for operation
depending on the category currently being
played back.
Button
/
1
: 


VOLUME
+/–
.
can be played. When
, use / and 
What it does
Starts normal playback and pauses/
unpauses playback.
Stops playback.
Press to skip to the start of the
current file, then previous files.
Press to skip to the next file.
Use to set the listening volume.