Buttons Description - Salus Controls QUANTUM SQ610RF Mode D'emploi

Buttons Description

Buttons Description
Button Function
1) Menu button / Return button.
2) In the MAIN SCREEN: Press and hold for 3 sec to change the thermostat operating mode
(Schedule mode / Permanent mode / Temporary override mode).
3) In the SETTINGS SCREEN: Press and hold for 3 sec to go back without saving the changes.
4) In the PAIRING SCREEN (in SYSTEM TYPE Menu): Press and hold for 3 sec to see other
pairing options.
„Down" Button (Decrease parameter value/moving on the menu in 'DOWN' direction)
"Up" Button (Increase parameter value/moving on the menu in 'UP' direction)
1) Press and hold for 3 seconds to POWER UP new device
2) "OK / Tick" Button (Confirm parameter value / Go to the next menu / Save settings)
3) In the MAIN SCREEN: Press and hold for 3 seconds to enter Standby mode
4) In the SETTINGS SCREEN: Press and hold for 3 sec to go back to the MAIN SCREEN & SAVE all the changes.
5) During PAIRING process – hold button for 3 seconds to POWER OFF or REBOOT the thermostat.
In the MAIN SCREEN - press and hold these buttons together for 3 seconds to LOCK / UNLOCK
+
the Thermostat keys).
5