Table 3. Back Panel Symbol Descriptions - DePuy Synthes PUREVUE 242302 Mode D'emploi

No. Description
9 Network Port
Two (2) Remote Ports - Remote 1 (Image Capture Remote) and Remote 2 (Video
10
Capture Remote
11
Equipotentiality Plug
12 Power Cord Receptacle
13 Fuse Cap
14 Supply Mains Power Switch
NOTE: Only approved electronic equipment (IEC60950-1, IEC60601-1) can be connected to the
four rear panel communications connectors (Figure 2)
Symbol Description
See instructions for use
Warning . See Instructions for Use
Refer to Instructions for Use
Caution: Federal (USA) law restricts this device to sale by or on the order of
a physician .
CSA evaluated the System and its accessories per standards IEC 60601-1
3rd edition: 2005 and IEC 60601-1-2 4th edition: 2014 . The Camera Control
System and accessories were found to be compliant .
258922
CE Mark . DePuy Synthes declares that this product meets the provisions of
the Council Directive 93/42/EEC of June 14, 1993, and amending directive
2007/47/EC concerning Medical Devices . All supporting documentation is
retained under the premises of the manufacturer .

Table 3. Back Panel Symbol Descriptions

14