Instructions For Adjusting Headgear; Instruction For Adjusting Angle Of Helmet - Kobalt SGY-A11WH Mode D'emploi

INSTRUCTIONS FOR ADJUSTING HEADGEAR

1. Loosen one of the headgear adjusting nuts (A) by turning the
nut counterclockwise.
2. Slide the angle adjustment shaft (E) to either position 1 or 2.
3. Tighten the headgear adjusting nut down by turning it clockwise.
Do not overtighten the nut as the threads may become stripped.
4. Repeat steps 1 - 3 on the other headgear adjusting nut.

INSTRUCTION FOR ADJUSTING ANGLE OF HELMET

1. Loosen one of the headgear adjusting nuts (A) by turning the
nut counterclockwise.
2. Move the adjustable angle regulator (D1L and D2R) to the
desired pin.
3. Tighten the headgear adjusting nut down by turning it
clockwise Do not overtighten the nut as the threads may
become stripped.
4. Repeat steps 1 - 3 on other side of headgear.
7
1
2
1
2
E
3
1
kobalttools.com
3
D1L