Disassembly Instructions For The Lens And Automatic Filter - Kobalt SGY-A11WH Mode D'emploi

DISASSEMBLY INSTRUCTIONS FOR THE LENS AND AUTOMATIC FILTER

1. Insert a finger into the semicircular hole and pull out on the
outer protection lens (J). Remove protective film from lens.
2. Loosen the filter frame screw (I) by turning the screw
counterclockwise.
3. Lift the filter frame (H) and remove the automatic
filter (K) by turning it sideways and pulling it through
the filter frame.
4. Remove the protective film on the automatic filter (K).
5
1
2
3
K
4
K
kobalttools.com
I
H