Coway BA16-CR/CE Mode D'emploi page 17

PRODUCT COMPONENTS
Display
'Water pressure' indicator
1
When water pressure button is
pressed, The LED goes on as level
1 2 3.
'Seat Temp.' indicator
3
When water pressure button is
pressed, The LED on as low, medium,
high and off.
Control panel
'Stop' button
1
Press this button to stop all currently
operating functions.
'Front' button
3
Press this button to start feminine
cleansing.
'Move' button
5
Press this button to oscillate the
nozzles during front/rear cleansing.
'Nozzle Position' button
7
Press this button to move nozzle's
position back and forth. You can
adjust its position up to 5 levels.
'Seat Temp.' button
9
Press this button to adjust the seat
temperature to any of 4 settings; low,
medium, high and off.
'Power' button
11
Press this button to turn on the bidet. Press
and hold it for 2 seconds to turn off.
※ If you press this button while any other
function is activated, current operation
stops.
'Water/Dry Temp.' indicator
2
The LED goes on as low, medium, high and off.
※ This indicator is used for both of front /
rear cleansing and drying.
'Rear' button
2
Press this button to start rear cleansing.
'Dry' button
4
Press this button to start drying.
'Water pressure' button
6
Press this button to change cleansing
water pressure. 3available cleansing power
settings: low, medium and high.
'Water/Dry Temp.' button
8
Press this button to adjust the water and
drying air temperature to any of
4 settings; low, medium, high and off.
'Nozzle cleaning' button
10
Press this button to clean the nozzles
with water. The nozzle is protruded so
it can be cleaned easily.
15
16