Hoover POWER DRIVE UH73220 Guide D'utilisation page 13

Maintenance
Cleaning & Maintaining the Brush Roll
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
LUBRICATION: The motor and brush roll
are equipped with bearings which contain
sufficient lubrication for their lifetime.
The addition of lubrication could cause
damage. Do not add lubricant to motor or
brush roll.
TIP: Rotate brush roll manually to ensure the belt is properly installed. Vacuum is equipped with an automatic brush roll shutoff in the event of overload or jam.
Check for obstructions in the brush roll area and remove any obstructions. When obstructions are cleared, resume cleaning as normal.
To access the brush roll, unscrew
the nozzle guard from the nozzle.
1
Remove any hair or
blockages.
3
Remove the brush roll by
pulling it up and out from the
vacuum belt.
2
Replace brush roll and nozzle
guard. Secure with screws.
4
13