Weston PRO Serie Instructions page 4

R e c on n e c t with Re a l F ood
VACUUM
PRO-2100
SEALER
U.S. P atented
7 / 10
Vacuum
Lid
12
5
13
4
QUICK REFERENCE GUIDE
AUTOMATIC VACUUM SEAL
1. PLUG power cord into 120-Volt outlet
2. Turn the POWER SWITCH to the "ON" position
3. Place VACUUM BAG OPEN END into VACUUM CHAMBER (See Instruction Book for Details)
4. CLOSE LID – APPLY PRESSURE to HANDLE – push START button
5. The machine will VACUUM and SEAL automatically*
MANUAL SEAL MODE
MANUAL SEAL MODE is used to disengage the vacuum pump and engage the sealing function manually
1. Follow steps 1-4 of the Automatic Vacuum Seal Instructions
2. When the desired vaccum is reached, press the MANUAL SEAL BUTTON
3. The machine will begin sealing the bag*
* The Sealing Time is pre-set to 3 seconds. The Cooling Time is pre-set to 3 seconds.
THIS IS ONLY A QUICK REFERENCE GUIDE. THOROUGHLY READ AND UNDERSTAND
THE SUPPLIED INSTRUCTION MANUAL BEFORE USING THIS APPLIANCE.
Power Cord
Storage
9
Pro-Series Vacuum Sealer
Maintenance Kit
Sold Separately
Model No. 08-0501-W
POWER
VACUUM
SEAL
COOL
8
6 / 11
2
3
4
Power Cord Port
STOP
MANUAL SEAL
START
1