Commissioning And Operation - auna PRO UHF-550 Quartett Mode D'emploi

1 Power and Audio Mute Switch.
2 Antenna: Transmits the RF signal of transmitter.
3 Belt clip: Attach the transmit- ter to the belt.
4 Audio input jack: it is suitable for lavalier system / headset system.
5 Low battery indicator: Red light glows when it is lack of power and
should renew batteriy.
6 LCD information display: Show the receiver frequency, channel, etc.
7 Gain adjusting volume: Adjust the transmitter audio input gain.
8 State setting switch: Set the using state of lavalier system (L) /
headset system (H).
9 UP function button: Sets channel data.
10 Down function button: Sets channel data.

COMMISSIONING AND OPERATION

Insert the Microphone Batteries
Inserting the batteries into the hand
microphone: Slide the bat- tery
compartment cover, insert the supplied
batteries into the battery compartment,
observing the polarity. Close the battery
cover.
Inserting the batteries
into the hand microphone:
Slide the bat- tery
compartment cover, insert
the supplied batteries into
the battery compartment,
observing the polarity, and
close the battery cover
EN
17