Triangle AIO 3 Mode D'emploi & Garantie page 20

EN
Spotify:
Listen out loud with Spotify connect
1. Connect your TRIANGLE AIO device to your WI-Fi network
2. Open up the Spotify app on your phone, tablet or laptop using the same Wi-Fi network
3. Play a song and select Devices Available
4. Select your TRIANGLE AIO device and start listening
The Spotify software's subject to third party licence four here:
www.spotify.com/connect/third-party-licences
Listening yo music in high definition:
To listen to music in high definition, you
must have a subscription with a provider
and set up the dedicated app.
Example on the Qobuz app >>
Choosing your speaker
38
5. Connection to other sources
• 1/8-INCH (3.5MM) JACK:
Connect a 1/8-inch (3.5mm) jack cable or an RCA cable to your external source, then select the
source.
• OPTICAL :
Connect an optical cable to your external source, then select the source.
• BLUETOOTH
Î Select the Bluetooth source
- either via the TRIANGLE AIO app (see p.37)
- or by pressing the button on your AIO speaker (see p.29, n°6) or on the remote control.
Î Once the Bluetooth source is selected, the LED turns blue. The pairing will automatically start
(the LED will start blinking and you will hear a beep when the connection is made).
Î Make sure you disconnect your device in case another user wants to take over.
1. NFC
Î For an automatic NFC pairing, bring your smartphone close to your speaker.
2. Standard
Î Go to the Bluetooth settings on your mobile device.
Î Select the source: TRIANGLE AIO3. Once the connection is established, the LED will turn solid
blue and you will hear 3 music notes.
39
EN