Playback Via Bluetooth® Enabled Devices; Cd Playback; Repeat Playback - RCA RS2929B Manuel De L'utilisateur

PLayBacK VIa BLUETooTH® ENaBLED DEVIcES
INITIaL DEVIcE PaIRING aND coNNEcTIoN
In order to pair and connect your Bluetooth® device for the first time:
SoURcE button to Bluetooth® mode and "
1. Press the
which means the unit is in Bluetooth® mode and ready to pair.
2. Turn on the Bluetooth® device you wish to pair and connect.
3. Press and hold the PaIR button on the remote control for 3 seconds. The "
which means it is pairing.
4. On your Bluetooth® enabled device, search for the "Bluetooth" in the list of discovered devices and select it.
It may take the unit and Bluetooth® enabled device a few seconds to pair.
5. When the " " icon lights up, the unit and the Bluetooth® enabled device are now paired and connected.
6. You can now enjoy audio from the unit.
Notes : If your Bluetooth device (e.g. Smart phone etc.) needs the PIN code while pairing, please enter 4-digit
number: 0000.
The unit can only be connected to one Bluetooth® device at a time.
REcoNNEcTING a BLUETooTH® ENaBLED DEVIcE
Bluetooth® enabled devices must be reconnected when the device has been turned off or the unit has been
turned off.
1. Turn on the Bluetooth® device that has already been paired with the unit.
SoURcE button to Bluetooth® mode and "
2. Press the
The " " icon flashes and starts flashing rapidly, and it auto searches for the last paired Bluetooth® device in
memory.
3. Depending on your Bluetooth® device, your device may automatically connect to the unit.
If the device does not automatically connect to the unit, press and hold the PaIR button on the remote
control for 3 seconds until the "
your Bluetooth® devices and select it.
4. Once the " " icon light up, the Bluetooth® enabled device is paired and connected.
5. You can now enjoy audio from the unit.
PaIR aND coNNEcT WITH aNoTHER NEW DEVIcE
In order to pair the unit to a new device, you must first disconnect the currently paired and connected Bluetooth®
device from the unit.
1. On the currently paired and connected Bluetooth® device, select the "Bluetooth" from the list of currently
paired and connected devices, and disconnect it. Please refer to your Bluetooth® enabled device User's Guide
for direction on how to disconnect a device.
Or turn off the Bluetooth® device.
2. Follow the Initial device pairing and connection instructions above.
1. Place a disc in the center with the label side up and then close the CD door gently.
SoURcE button to CD mode. "
2. Press the
no. is shown on the display.
PLay/PaUSE button to start playing.
3. Press the
Repeat current Track
Press the /MEM.UP button until "
Repeat the Entire cD
/MEM.UP button until "
Press the
cancel Playback Mode
/MEM.UP button until "
Press the
RS2929B_IB_E&S&F_W041.indd 5
"icon is shown on the display. The "
" icon is shown on the display.
" icon starts flashing rapidly, then search for the "Bluetooth" in its list of

cD PLayBacK

" appears and "- -" blinks on the display. Then the total track

REPEaT PLayBacK

" blinks on the display. The current track will be played repeatedly.
" stops blinking and remains on. All tracks will be played repeatedly.
" disappears.
EN - 5
" icon flashes
" icon will start flashing rapidly
2016/5/4 16:25:33
EN EN