Cleaning And Maintenance; Safety Instructions - Topcom KS-4250 Manuel D'utilisateur

B. iOs
a Password
If you have changed the camera password with another smartphone or tablet, you need to
tap the row to correct the password for Internet connection.
b Reconnect
You need to tap "Reconnect" to re-confirm the Internet connection if the camera status
shows offline.
5 Tap the icon and select "Exit" if you want to exit the app.
12 Reset the camera to factory defaults
While the camera is powered on for at least 1 minute, press the reset button (using a small object
or a pin) for at least 3 seconds, the power/status LED will start blinking. The camera will be reset
to factory default, which is useful if you forget the password of the camera.

13 Cleaning and maintenance

This section contains important instructions for cleaning and maintaining the equipment.
Follow these instructions to ensure trouble-free use and prevent damage to the equipment due to
improper maintenance.
13.1

Safety Instructions

DANGER
Risk of fatal injury due to electric shock!
• Before cleaning the equipment, switch it off and unplug the power cable from the
mains receptacle.
CAUTION
• Do not use cleaning products or solvents. They can damage the case or seep into the
equipment and cause permanent damage.
13.2 Cleaning
– Clean the equipment with a soft, slightly dampened cloth.
– Clean soiled connectors and contacts with a soft brush.
– If the equipment gets wet, switch it off. Do not use the equipment before it is completely
dry.
10
®
Babytalker 3500 SEDS