Simeon Ranger Manuel De L'utilisateur page 3

Ranger receiver
Using the Ranger keypad
Power On / Off
Volume control
Volume control lock / unlock
Microphone mute / unmute
Change channel
Socket for headphones or
other listening accessories
Micro USB charging port
You can listen to your Ranger receiver with stereo
headphones, earbuds and a range of specialized
listening accessories.
Caution - avoid excessive volume levels. Listeners
with normal hearing sensitivity should use low-output
(attenuated) earphones for prolonged use of Ranger.
The receiver volume control can be locked with the
keypad to prevent unintended volume changes.
If you have telecoil-equipped hearing aids or cochlear
implants, use the neckloop or other optional Ranger
coupling accessories to connect to your device
wirelessly. You may have to select a 'T' or 'MT' setting
on our personal equipment. Consult with your hearing
professional to select the best listening accessory for
your personal equipment.
Note that when no transmission is detected for 20
minutes, the receiver will turn off automatically to
conserve the battery power.
Press and hold
Increase Decrease
Press and hold
Press briefly
Press and hold
Select a channel using
Press briefly to confirm the channel selection
for 2 seconds
together for 2 seconds
together for 2 seconds
or