Symbols And Icons On The Display; Operation Of The Device - Giorgio Bormac 8+ Série Manuel D'utilisation

• Symbols and icons on the display

Symbol
Number of data stored in Data Logger
mode on instrument memory
Printer data logger
External keyboard*
Data logger with data sending on PC
Data logger with data sending on
instrument memory
Automatic data logger mode
(when blinking is recording)
Manual data logger mode
* function available only for 80+ Series

Operation of the device

• When the device is powered on, the instrument enters measurement mode in the last parameter that
was used.
• To scroll through the parameter screens, press
on the upper left display.
pH8+DHS - pH80+DHS
pH
mV/ORP
Analogic pH
Selective Ions*
Cell C=1
Example: simultaneous screen pH/Cond on PC8+DHS and PC80+DHS
* parameters available only for 80+ Series
• In the measurement screen you are using press and hold "
parameter (see next paragraphs).
UM Serie 880 EN rev.2 30.07.2020
Description
COND8+ - COND80+
Conductivity
TDS
Salinity
Resistivity*
12
Symbol Description
Titration stability criterion
(continuous measurement)
Measurement stability icon
HOLD mode, value is freezed
No user Password
User password entered
Sample ID*
Calibration expired
key, the current measurement parameter is shown
PC8+DHS - PC80+DHS
Simultaneous pH/Cond
Selective Ions*
CAL" key to start calibration of the active
pH
mV/ORP
Analogic pH
Conductivity
TDS
Salinity
Resistivity*
EN