Spirit Commercial ST800DRBA Guide D'utilisation page 5

FACILITY SAFETY PRECAUTIONS
Read the Owner's Manual carefully before assembling, servicing or using the equipment.
•
Make sure that each attachment is set up and operated on a solid level surface. Do not install equipment
•
on an uneven surface.
Make sure that all users are properly trained on how to use the equipment.
•
Make sure there is enough room for safe access and operation of the equipment.
•
Perform regular maintenance checks on the equipment. Also pay close attention to all areas must
•
susceptible to wear.
Immediately replace worn or damaged components. If unable to immediately replace worn or
•
damaged components then remove from service until the repair is made.
• Use only Dyaco Canada supplied components to maintain/repair the equipment.
Keep a repair log of all maintenance activities.
•
NOTE: It is the sole responsibility of the user/owner or the facility operator to ensure that regular
maintenance is performed
SAFETY GUIDELINES AND PRACTICES
Dyaco Canada recommends that all fitness equipment be used in a supervised area. It is recommended
that the equipment be located in an access-controlled area. Control is the responsibility of the owner.
The extent of control is at the discretion of the owner.
It is the responsibility of the purchaser/user of Dyaco Canada products to read and understand the
owner's manual, and warning labels; as well as instruct all individuals, whether end users or supervising
personnel, on proper usage of the equipment.
PROPER USAGE
Use attachment only as described in the manual. Failing to follow proper instructions may result in
injury.
• Do not lean against or pull on the framework or any component, whether attachment is at rest or in use.
Inappropriate or improper use may result in injury to users or third parties (bystanders).
• Do not use attachment if it is not located on a solid level surface or is improperly installed.
• Provide an adequate safety perimeter between the attachment, walls and other equipment to ensure that
the facility has the proper clearance for usage and training.
STANDARD COMPLIANCE
Dyaco Canada products meet or exceed applicable ASTM and EN Standards
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Customer service: 1-888-707-1880
Email: customerservice@dyaco.ca
4
Dyaco Canada Inc 2020